BTA V2 bottle cage adapter for Canyon SLX / CFR
€89.90
Available, delivery time: 1-3 days
Product information "BTA V2 bottle cage adapter for Canyon SLX / CFR"
BTA (between the arms) V2 adapter for mounting a bottle cage, suitable for Canyon Speedmax SLX / CFR with disc brakes.
New design with improved durability and the ability to mount a second bottle or push the first bottle further back with an additional adapter (not included in scope of delivery).
The adapters are a product from Radsport Ibert and not an original part from the manufacturer!
The handlebars and extensions are not part of the product. The BTA adapter is clamped onto the mono extension and screwed to the side. There are 4 M5 threads at the top for mounting a bottle cage in 2 different positions.
Attention: Due to the width of 50mm, there must be 50mm of space between the armrest holder and the computer holder, otherwise the BTA adapter cannot be mounted here.
The BTA adapter is available in five different angles. The Canyon Mono Extension for the Speedmax has a 5° angle, meaning that without the angle spacer, the bottle is horizontal when the 5° adapter is installed. With a 10° angle spacer, the 15° adapter would be required, and so on.
The Canyon Gear Groove Extension has no angle; the angle spacer = BTA angle. Without the angle spacer, I recommend the 5° BTA.
Example for Speedmax:
Without angle spacer: 5° BTA adapter
With 3° Canyon angle spacer: Effective 8°, so 5° BTA adapter is ideal
With 6° Canyon angle spacer: Effective 11°, so 10° BTA adapter is ideal
With Radsport Ibert angle spacer 10°: Effective 15°, so 15° BTA adapter is ideal
With Radsport Ibert angle spacer 15°: Effective 20°, so 20° BTA adapter is ideal
With Radsport Ibert angle spacer 20°: Effective 25°, so 25° BTA adapter is ideal
Scope of delivery: 1x adapter, 4x screw M5x12mm Angle: 5, 10, 15, 20, 25 degrees (selectable, only one variant included)
Material: PA12 SLS black painted
Assembly: Slide the holder over the mono extension and tighten the M5 screws hand-tight (max 1 Nm). Tighten the bottle holder with M5 screws to a maximum of 1,5 Nm. Danger! If the torque is too high, the thread inserts can be loosened in 3D printing, so never mount them too tightly.
The holder can also be carefully bent open so that it "snaps" around the mono extension - then only a maximum of one side of the pads has to be removed.
Login
Adapter for second bottle:
Adapter for extending the BTA Adapter V2. Attention: The rail is NOT compatible with the BTA Adapter V1, which is only designed and approved for one bottle! This adapter allows you to position the water bottle further back toward your upper body or to mount a second bottle. Installation: The adapter rail is screwed directly onto the BTA V2 adapter using the included 4x M5x12mm countersunk screws. Raising the rail with a riser kit is not permitted! If a bottle cage is mounted directly onto the rail, 1-2 countersunk screws must be removed accordingly. The bottle cage is then mounted using the included M5x16 fillister head screws, with the screw then passing "through" the rail. At least 2 of the countersunk screws must remain installed under the bottle cage, ensuring that the rail is always secured to the BTA adapter with at least 4 screws. (See images) Material: Black anodized 7075 aluminum (image shows the silver version before anodizing!) Countersunk: For M5 screws Scope of delivery: Adapter rail and all screws required for installation. The BTA adapter itself is not included!