Profile Design
The HSF BTA Wedges allow you to level your hydration system on any standard BTA mount. The kit includes three 5º wedges, for a total tilt adjustment of 15º - making it easy to align your hydration system to allow maximum filling.
Profile Design Riser Kit - Adapters | A2 to A3 | Aluminum Four-piece set with aluminum adapters for using current A3 risers on older A2 systems. The adapters create an additional stack of 25 mm. Compatible with the Aeria Ultimate aerobar from Profile Design. When using base bars from other manufacturers, the 25 mm is the minimum stack. In this case, the corresponding bolt length specifications must also be observed. Scope of supply: 4 adapters: 2x top (15 mm), 2x bottom (10 mm, left + right) Installation: For installation, please follow the instructions and manual on www.profile-design-eu.com!
Profile Design A2A Hi-Riser Kit (5/10/20mm*6) The A2A risers are specially designed for the Aeria Ultimate. The system is also compatible with A2/A3 adapters. SPECIFICATIONS Maximum height: 80mm Specially designed for the Aeria Ultimate Includes an aluminum bridge Compatible with the A2 riser system Can be used with an adapter with the A3 riser system Color: Black Weight: (Complete kit) 35mm: 570g 60mm: 770g Contents: Profile Design A2A Hi-Riser Kit (5/10/20mm*6) Risers: 2x 5mm | 2x 10 mm | 6x 20mm 1x Bridge (5mm) Installation: For installation, please follow the instructions and manual on www.profile-design-eu.com!
Profile Design A2A Low-Riser Kit (5/10/20mm) The A2A risers are specifically designed for the Aeria Ultimate. The system is also compatible with A2/A3 adapters. SPECIFICATIONS Maximum height: 35mm Specifically designed for the Aeria Ultimate Compatible with the A2 riser system Can be used with an adapter for the A3 riser system Color: Black Weight: (Complete kit) 35mm: 570g 60mm: 770g Scope of delivery:1x Profile Design A2A Low-Riser Kit (5/10/20mm) Riser: 2x 5mm | 2x 10 mm | 2x 20mm Installation: For installation, please follow the instructions and manual on www.profile-design-eu.com!
Profile Design Riser Kit - Adapters | A3 | Reach Extender for Armrests The two aluminum adapters for triathlon handlebars, which are equipped with A3 riser systems, allow the reach of the armrests to be increased by 32 mm. By using the corresponding adapter set (not included), also a combination with A2 systems is possible. The adapter kit makes it easier for the rider to adopt a longer aero position. From the original construction of the aerobar retains the front bolt that connects handlebar and base (bracket) to ensure a secure and firm structure. Technical details of the Profile Design A3 reach extender riser height: 25 mm offset: 30 mm weight: approx. 90 g (manufacturer's specification) Compatibility: handlebars / aerobars: Wing 20c+, Wing Ultimate, Aeria Ultimate (with "A2 to A3" adapters) bikes: BMC Speedmachine, Canyon Speedmax CF (2024), Wilier Supersonica Scope of supply: 2 adapters (left + right) incl. 2 bolts (M6 x 35 mm) and 2 washers (6 x 12 x 1.5 mm) Installation: For installation, please follow the instructions and manual on www.profile-design-eu.com!
Profile Design Riser Kit - A3A | High | Aluminum | for Wing 20c+/Ultimate The A3 risers are designed specifically for the Wing 20C+ and Wing Ultimate. The system is backwards compatible with A2 risers by using the A2/A3 adapter. Key Features of the Profile Design Aerobar A3A Hi-Riser Kit Compatibility: Wing 20C+ and Wing Ultimate Compatible with the A3 riser system Can be used with A2 riser system with adaptor Maximum Height: A3A High Riser w/A2 Bridge Kit = 60mm A3A High Riser w/A2 Bridge Kit Includes: Risers: 5mm: 2 Risers10mm: 2 Risers40mm: 2 Risers Bolts: 80mm: 4 Bolts85mm: 4 Bolts90mm: 4 Bolts95mm: 4 Bolts100mm: 4 Bolts Accessories: 4x Washers, 1x A2 Bridge (5mm) Installation: For installation, please follow the instructions and manual on www.profile-design-eu.com!
Profile Design Riser Kit - A3A | High | Aluminum | for Wing 20c+/Ultimate The A3 risers are designed specifically for the Wing 20C+ and Wing Ultimate. The system is backwards compatible with A2 risers by using the A2/A3 adapter. Key Features of the Profile Design Aerobar A3A Hi-Riser Kit with carbon bridge Compatibility: Wing 20C+ and Wing Ultimate Compatible with the A3 riser system Can be used with A2 riser system with adaptor Maximum Height: A3A High Riser w/A2 Bridge Kit = 60mm A3A High Riser w/A2 Bridge Kit Includes: Risers: 5mm: 4 Risers10mm: 2 Risers40mm carbon bridge Bolts: 80mm: 4 Bolts85mm: 4 Bolts90mm: 4 Bolts95mm: 4 Bolts100mm: 4 Bolts Accessories: 4x Washers, 1x A3A Bridge 40mm) Installation: For installation, please follow the instructions and manual on www.profile-design-eu.com!
Profile Design Riser Kit - A3A | Low | Aluminum | for Wing 20c+/Ultimate The A3 risers are designed specifically for the Wing 20C+ and Wing Ultimate. The system is backwards compatible with A2 risers by using the A2/A3 adapter. Key Features of the Profile Design Aerobar A3A Low-Riser Kit Compatibility: Wing 20C+ and Wing Ultimate Compatible with the A3 riser system Can be used with A2 riser system with adaptor Maximum Height: A3A Low Riser Kit = 35mm A3A Low Riser Kit Includes: Risers: 5mm: 2 Risers10mm: 2 Risers20mm: 2 Risers Bolts: 45mm: 4 Bolts50mm: 4 Bolts55mm: 4 Bolts60mm: 4 Bolts65mm: 4 Bolts70mm: 4 Bolts75mm: 4 Bolts Accessories: Washer: 4 Washers Installation: For installation, please follow the instructions and manual on www.profile-design-eu.com!
Replacement cylinder for Profile Design Aeria Ultimate Bracket P.# 274461 - Barrel - Aeria Bracket w/Slot Black P.# 274462 - Barrel - Aeria Bracket w/Slot & Slant Black
New profile design computer mount, matching the unique shape of the ASC43 and 52 extensions! Compatible Computers: Garmin 500 and 800 series (Compatible with Wahoo with aftermarket adapter)
Profile Design Tilt Booster Four-piece set with aluminum adapters for using current A3 risers on older A2 systems. The adapters create an additional stack of 25 mm. Compatible with the Aeria Ultimate aerobar from Profile Design. When using base bars from other manufacturers, the 25 mm is the minimum stack. In this case, the corresponding bolt length specifications must also be observed. Scope of supply: 4 adapters: 2x top (15 mm), 2x bottom (10 mm, left + right) Installation: For installation, please follow the instructions and manual on www.profile-design-eu.com!