BTA bottle cage adapter for Canyon SLX / CFR

BTA (between the arms) adapter for mounting a bottle cage, suitable for Canyon Speedmax SLX / CFR with disc brakes.

The adapters are a product from Radsport Ibert and not an original part from the manufacturer!

The handlebars and extensions are not part of the product. The BTA adapter is clamped onto the mono extension and screwed to the side. There are 4 M5 threads at the top for mounting a bottle cage in 2 different positions.

Attention: Due to the width of 50mm, there must be 50mm of space between the armrest holder and the computer holder, otherwise the BTA adapter cannot be mounted here.

The BTA adapter is available in 5 different angles. The Canyon Mono Extension has an angle of 5° itself, i.e. without an angled spacer the bottle is horizontal when the 5° adapter is mounted. With an angle spacer of 10°, the 15° adapter would be required, etc.

Scope of delivery: 1x adapter, 4x screw M4x12mm Angle: 5, 10, 15, 20, 25 degrees (selectable, only one variant included)

Material: PA12 SLS black painted

Assembly: Slide the holder over the mono extension and tighten the M4 screws hand-tight (max 1 Nm). Tighten the bottle holder with M5 screws to a maximum of 1,5 Nm. Danger! If the torque is too high, the thread inserts can be loosened in 3D printing, so never mount them too tightly.
The holder can also be carefully bent open so that it "snaps" around the mono extension - then only a maximum of one side of the pads has to be removed.